TFS110C.doc version1.3 07.06.2000. vi telefilter filter specification tfs 110 c - 1/5 vi telefilter vectron international, inc. potsdamer stra?e 18 267 lowell road d 14 513 teltow / germany hudson, nh 03051 / usa tel: (+49) 3328 4784-52 / fax: (+49) 3328 4784-30 tel: (603) 598-0070 fax: (603) 598-0075 e-mail: tft@telefilter.com e-mail: vti@vtinh.com vi telefilter reserves the right to make changes to the product(s) and/or information contained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. measurement condition ambient temperature : 23 c input power level : 0 dbm terminating impedances : for input: 890 ? || - 5,6 pf for output: 680 ? || - 5,9 pf characteristics remark: reference level for the relative attenuation a rel of the tfs 110 c is the minimum of the pass band attenuation a min . the minimum of the pass band attenuation a min is defined as the insertion loss a e . the centre (reference) frequency f c is the arithmetic mean value of the upper and lower frequencies at the 3 db filter attenuation level relative to the insertion loss a e . data typ. value tolerance / limit insertion loss (reference level) a e 11,9 db max. 13 db centre frequency f c at ambient temperature t a ( f cat ) 110,592 0,035 mhz pass band shape (3 db-bw) gaussian bandwidth at ambient temperature : 3 db bandwidth 965 khz min. 900 khz 10 db bandwidth 1695 khz min. 1600 khz 20 db bandwidth 2255 khz max. 2420 khz 30 db bandwidth 2600 khz max. 2700 khz 40 db bandwidth 2840 khz max. 3070 khz relative attenuation a rel f c 450 khz max. 3 db f c 450 khz ? f c 800 khz max. 10 db f c 1210 khz ? f c 1395 khz min. 20 db f c 1395 khz ? f c 1535 khz - min. 30 db f c 1535 khz ? f c 10 mhz 45...55 db < min. 40 db group delay ( mean value ) : 1,2 s group delay ripple (p-p) : f c ? f c 800 khz 160 ns max. 300 ns deviation from linear phase (p-p): f c ? f c 800 khz 3 frequency inversion temperature ( t o ) 10 c temperature coefficient: 1-st order [ tc f (1) ] + 1,7 ppm/k 2-st order [ tc f (2) ] - 0,06 ppm/k2 frequency deviation of f c over temperature: * ) ? f c (hz) = [ tc f (1) x (t - t o ) + tc f (2) x (t - t o )2 ] x f to (mhz) operating temperature range - 10 c ... + 60 c storage temperature range - 40 c ... + 85 c input power level max. 10 dbm. permissible dc voltage v dc - 12 v permissible ac voltage v pp - 10 v * ) f to is reference frequency f c at frequency inversion temperature ( t o ) generated: dunzow w.p. checked/approved: dr. bert wall
TFS110C.doc version1.3 07.06.2000. vi telefilter filter specification tfs 110 c - 2/5 vi telefilter vectron international, inc. potsdamer stra?e 18 267 lowell road d 14 513 teltow / germany hudson, nh 03051 / usa tel: (+49) 3328 4784-52 / fax: (+49) 3328 4784-30 tel: (603) 598-0070 fax: (603) 598-0075 e-mail: tft@telefilter.com e-mail: vti@vtinh.com vi telefilter reserves the right to make changes to the product(s) and/or information contained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. package (all dimensions in mm) 4. 50 ? ? ? ? matching network c1 c2 c1 c2 tfs 110c tft m22 datecode: year+week k 1998 l 1999 m 2000 .......
TFS110C.doc version1.3 07.06.2000. vi telefilter filter specification tfs 110 c - 3/5 vi telefilter vectron international, inc. potsdamer stra?e 18 267 lowell road d 14 513 teltow / germany hudson, nh 03051 / usa tel: (+49) 3328 4784-52 / fax: (+49) 3328 4784-30 tel: (603) 598-0070 fax: (603) 598-0075 e-mail: tft@telefilter.com e-mail: vti@vtinh.com vi telefilter reserves the right to make changes to the product(s) and/or information contained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. stability characteristics after the following tests the filter shall meet the whole specification: 1. shock: 500g, 18 ms, half sine wave, 3 sho cks each pl ane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; din iec 68 t2 - 6 3. damp heat: 25 c to 55c / 95% r.h. / 10 cycles (cycle) din iec 68 - 2 ? 30 db 4. resistance to solder heat (reflow): max. 2 times reflow process; for temperature conditions refer to the attached "air reflow temperature conditions" on page 4; packing tape & reel: din iec 286 - 3, with exception of value for n and minimum bending radius; tape type ii, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 1700 real of empty components at start: min 300 mm real of empty components at start including leader: min 500 mm trailer min 300 mm a c n w 1 w 2 reel (all dimensions in mm): a : 330 w1 : 24,4 +2 / 0 w2 (max) : 30,4 n (min) : 60 c : 13 +0,5 / -0,2 the minimum bending radius is 45 mm. the mounting surface of the filters faces the bottom side of the embossed carrier tape. the marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket hole s on the right side of the tap tape (all dimensions in mm) w : 24 0,3 po : 4 0,1 do : 1,5 + 0,1 e : 1,75 0,1 f : 11,5 0,1 g (min) : 0,6 p2 : 2 0,1 p1 : 12 0,1 d1(min) : 1,5 ao : 7,1 0,1 bo : 13,9 0,2 d o p o e f w p 1 embossed carrier tape cover tape g p 2 b o a o ct d 1 ko t ko : 2,1 0,1 t : 0,3 0,05 ct : 21,5 0,1
TFS110C.doc version1.3 07.06.2000. vi telefilter filter specification tfs 110 c - 4/5 vi telefilter vectron international, inc. potsdamer stra?e 18 267 lowell road d 14 513 teltow / germany hudson, nh 03051 / usa tel: (+49) 3328 4784-52 / fax: (+49) 3328 4784-30 tel: (603) 598-0070 fax: (603) 598-0075 e-mail: tft@telefilter.com e-mail: vti@vtinh.com vi telefilter reserves the right to make changes to the product(s) and/or information contained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. air reflow temperature conditions 1st and 2nd air reflow profile name: pre-heating periods main-heating periods peak temperature temperature: 150 c - 170 c over 200 c 230 c 5 c time: 60 sec. - 90 sec. 20 sec. - 25 sec. chip-mount air reflow profile time / s ec. temperature / c 0 20 40 60 80 100 120 140 160 180 200 220 240 260 0 20 40 60 80 100 120 140 160 180 200 220 240 table for temperature vs. time during the air reflow process tolerance of temperatures: 5 c time / sec. temperature / c time / sec. temperature / c 0 23 140 160 10 34 150 161 20 46 160 164 30 60 170 170 40 80 180 180 50 103 190 200 60 121 195 220 70 134 200 230 80 143 205 220 90 150 210 200 100 154 215 180 110 156 220 165 120 158 230 140 130 159 240 120
TFS110C.doc version1.3 07.06.2000. vi telefilter filter specification tfs 110 c - 5/5 vi telefilter vectron international, inc. potsdamer stra?e 18 267 lowell road d 14 513 teltow / germany hudson, nh 03051 / usa tel: (+49) 3328 4784-52 / fax: (+49) 3328 4784-30 tel: (603) 598-0070 fax: (603) 598-0075 e-mail: tft@telefilter.com e-mail: vti@vtinh.com vi telefilter reserves the right to make changes to the product(s) and/or information contained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. history version reason of changes name date 1.2 generate specification according to customer requirements. dunzow w. 07.04.2000 1.3 correct error in relative attenuation : dunzow w. 07.06.2000 in f c 1210 khz ... f c 1395 khz from max. 20 db to min. 20 db correct stability characteristics. correct packing . add typical value of deviation from linear phase . add formula for temperature dependence. add datecode .
|
